BMW Motorrad Vietnam

R 1200 GS Adventure

Bạn thích trải nghiệm đường gập ghềnh đá sỏi hay hoang sơ gió lộng? Chẳng có thử thách nào, từ đường nhựa đến địa hình khúc khuỷu, đá rải hay cát phủ lối đi có thể cản lối chiếc BMW R 1200 GS Adventure đời mới với khả năng xử lý linh hoạt và nhạy bén. Chiếc xe dành cho những biker muốn trải nghiệm và vượt lên trên giới hạn của bản thân, những tay lái luôn mang trong mình khao khát phiêu lưu cũng như tận hưởng cảm giác lái tuyệt vời.

Hãy sẵn sàng chinh phục mọi địa hình với chiến mã “enduro” đáp ứng mọi nhu cầu thực tế của bạn. R 1200 GS Adventure có 2 chế độ lái tiêu chuẩn: “Rain” và “Road” (đi trời mưa hoặc đi đường khô ráo). Chỉ với một nút nhấn luân chuyển giữa 2 chế độ, bạn sẽ trải nghiệm cảm giác lái hoàn toàn khác biệt như cưỡi 2 chiến mã trong cùng một cỗ xe. Ngoài ra, các tay nài có thể bổ sung thêm các chế độ lái tùy chọn khác. Hệ thống hỗ trợ chuyển số cho phép người lái sang số hoặc trả số khi vận hành ở tốc độ cao mà không cần ngắt bộ ly hợp, giảm thời gian chuyển số sẽ tăng sự ổn định của với bánh sau hơn.

Dung tích bình chứa 30 lít cùng động cơ tối ưu hóa nhiên liệu giúp bạn thuận lợi chinh phục những cung đường dài “không ngừng nghỉ”. Trang bị xe được nâng cấp với màn hình hiển thị thông số trên mặt tay lái, giúp xe chuyển hướng chính xác và cung cấp các dữ liệu hữu ích cho người lái như mức nhiên liệu, tiêu hao nhiên liệu và tốc độ. Chiếc “enduro” này được tích hợp thêm thiết bị chứa đồ bên trên bình xăng cho phép bạn trữ các vật dụng nhỏ và dễ dàng lấy ra vào. Công nghệ chìa khóa thông minh (tắt/ mở không cần sử dụng chìa khóa) mang đến sự tiện dụng và thoải mái hơn cho người sử dụng. Đi kèm sự năng động là động cơ Boxer huyền thoại, 2 xy-lanh 4 thì làm mát bằng nước cho công suất 125 mã lực, mô-men xoắn cực đại 125 Nm.

R 1200 GS Adventure đặc trưng với thiết kế không thể nhầm lẫn, ghế ngồi thoải mái, kính chắn gió và bảo vệ trước thời tiết đi kèm dáng vẻ đầy uy lực.

R 1200 GS Adventure. Ấn tượng trên mọi nẻo đường.

Thông số kỹ thuật
Dung tích động cơ: 1,170 Công suất cực đại : 92 (125) / 7,750
Momen xoắn cực đại : 125 / 6,500 (Nm / rpm) Vận tốc tối đa : >200 km/h
Mức tiêu thụ nhiên liệu : 4,96 l/100km Mâm trước : 3,0 x 19 inch
Chiều cao ghế : 890/ 910 mm Mâm sau: 4,5 x 17 inch
Chiều dài cơ sở : 1.510 mm Kích thước (dài x rộng x cao) : 2.255 x 980 x 1.450
Dung tích bình xăng : 30 l Trọng lượng xe: 263 kg
Màu sơn không có ánh kim
Trang bị tiêu chuẩn
Màn hình hiển thị thông số trên mặt tay lái Chức năng chờ cho hệ thống dẫn đường
Chức năng kiểm soát hành trình Đồ gá bằng Aluminim cho hộp đựng
Hệ thống cảnh báo chống trộm Chức năng lái chủ động (ABS, ASC)
Ống xả mạ crome Chức năng sưởi tay nắm
Đèn báo rẽ công nghệ LED mau trăng Hệ thống treo điều chỉnh điện tử
Chức năng cảnh báo áp suất lốp Sách hướng dẫn sử dụng bằng tiếng Anh

 

Các kích thước mang tính tham khảo xe máy không chở hàng hóa theo tiêu chuẩn DIN
Theo quy định trong chỉ thị số 93/93/EEC của Châu Âu khi bình nhiên liệu được đổ đầy đến 90% dung tích khoang chứa của bình.

Softbag for passenger seat

The waterproof softbag is secured to the passenger seat and provides 14 litres of storage space with an option to extend it to 18 litres ‒ just the right size for, e.g. the daily commute and day trips. It is also the perfect way of expanding the storage space provided by the tank bag.

• Hard-wearing polyester fabric with PVC coating
• Waterproof main compartment, approximately 14 l, extensible to approximately 18 litres, inner bag with roll top
• Zip fastener around three sides provides good accessibility
• Two outer pockets with zip fasteners on the side, water-repellent
• Water-repellent compartment inside the lid with zip fastener
• Bottom is moulded EVA, shaped for a snug fit and with an anti-slip PU surface layer
• Practical carry handle and adjustable, removable shoulder strap
• GS inscription on side bags, silver BMW Motorrad inscription embossed on the lid.
• Dimensions (LxWxH): approx. 27x28x18 cm (extends to 24 cm)
• Colour: Black

Cylinder-head cover guard made of special-steel

• Excellent protection for the cylinder-head cover, preventing scratches and damage caused by flying stones
• Plastic contact guard at outside, replaceable
• Large rubber buffer on inside
• BMW Motorrad logotype on contact guard
(As seen on the R1200RT)

Aluminium luggage system

• Aluminium cases and topcase, robust and suitable for off-roading
• Capacity:
– Cases: Approx. 36 l (right), approx. 44 l (left)
– Topcase: Approx. 32 l
• Maximum payload: 10 kg (per case), 5 kg (topcase)
• Recommended top speed with case(s) or topcase installed: 180 km/h
• Looks match those of the motorcycle
• Supplied without case carrier and without lock barrels
• Optional:
– Liner for cases and topcase
– Backrest pad for topcase
– Carry handle for cases and topcase

Liner for aluminium cases and topcase

• Waterproof liner made of tarpaulin material
• Capacity matched to the aluminium cases and topcase
• Roll-and-seal closure with bayonet buckle
• Carry handles and removable shoulder strap
• 4 outside snap fasteners on sides for securing the liners to the cases or topcase with carry-handle set
• Large GS logotype
• Colour: Black/grey

Carry handle for aluminium cases and topcase

• Carry handle makes it easy to carry the aluminium case and topcase
• Can also be used to secure items of luggage, e.g. liners, to top of case/topcase
• Scope of supply: 1 handle, 4 straps, instructions
• The straps attach to the eyelets on the case or topcase

Luggage plate

• Luggage plate made of black painted plastic
• Installs instead of the rear seat
• Better weight distribution with items of luggage set closer to the vehicle’s centre of gravity
• Together with the cases, creates a large area for attaching bulky items of luggage (note: luggage plate approx. 12 mm lower than the top of the case lids).
• Easy access to standard on-board toolkit under hinged plate (with large GS logotype)
• Not in combination with Rallye seat with luggage plate

Tank rucksack

• Highly functional tank rucksack
• Hard-wearing PVC-coated polyester fabric
• Bottom is moulded EVA (ethylene vinyl acetate), shaped for a snug fit on the fuel tank and with an anti-slip PU surface layer
• Waterproof main compartment:
– Capacity: Approx.12 l, extendible to approx. 16 l
– Liner made of nylon fabric with PU coating
– Waterproof with roll-and-seal closure with bayonet buckle and taped seams
– Zipper is lockable (lock not included in the scope of supply)
• Highly water-repellent map pocket:
– Opens wide for access by two-way zipper (in main compartment)
– Anti-slip PU coating on inside
• Water-repellent zippered outside pocket with bottle-holder function
– A pullcord on the inside secures a 0.5 l PET bottle where it is quickly accessible on a short stop.
• Carry handle and removable shoulder strap
• GS logotype on side
• Colour: Black/grey
• Optional: Vario insert for tank rucksack provides a variable means of dividing the capacity of the main compartment

Vario insert

• Flexible division of the space available inside the tank rucksack:
– Flexible outer ring, width adjustable by Velcro-type fastener (LxH: approx. 100×13 cm)
– Flexible interior compartmentalisation consisting of 2 long and 2 short flexible wall inserts, each with a Velcro-type fastener at both ends. The wall inserts offer the opportunity to divide the interior flexibly into smaller compartments.
• Small zippered pocket attaches by Velcro, with BMW Motorrad logotype
• Suitable for BMW Motorrad tank rucksacks with overall capacity of 11 litres or more
• Material: flexible ethylene vinyl acetate (EVA), with self-attaching polyester covering
• Colour: Grey

Other useful luggage solutions

• Softbag 2 large, 55 l
• Softbag 2 small, 31-36 l
• Stuffbag 2, 50 l
• Strap
• bungee-cord spider

LED flashing turn indicators

• Attractive flashing turn indicators on stalks, with LED technology
• White turn indicator glass with 2 LEDs per turn indicator
• Enhanced safety on the road, provided by virtually zero-wear LED lights
• Considerable reduction in current drain:
– The flash frequency has to be changed when LED turn indicators are fitted. In BMW Motorrad’s case this takes place via the CAN bus. All aftermarket LED flashing turn indicators require the installation of a resistor (which means there is no reduction in power consumption)
• Installation and enabling by authorised BMW Motorrad dealers only; installation instructions on the RSD (Repair and Service Data BMW Motorrad) DVD
• Note: No approval for the USA market

Covers for grab-handle holes

• Black plastic covers
• Covers hiding holes for rear grab handles when grab handles not installed
• Visual enhancement and corrosion protection for tapped holes
• Scope of supply: 4 covers (front and rear, right and left), installation instructions
• Practical addition to the accessory luggage plate (part number 77 44 8 523 742) and Rallye seat with luggage plate (part number 77 34 8 523 744), if the standard rear grab handles are removed

HP sports silencer by Akrapovič

• Slip-on silencer for throaty sound and sporty looks
• More torque at low to midrange rpm, power at the level of the standard configuration
• Hexagonal-asymmetric shape, exclusive design for BMW Motorrad.
• Material is all-titanium (shell, connecting pipe and internals)
• Carbon end cap and heat shield
• Weight: approx. 4.7 kg including mounted parts (marginally (< 0.5 kg) lighter than the standard part)
• HP logotype large and Akrapovič logotype small lasered into side face
• Approved for road use (EU General Operating Permit)¹
• Supplied complete with installation instructions

¹ Always comply with the conditions for approval applicable in the country of use.

Windscreen, tinted

• Windscreen of the R 1200 GS as smaller alternative to the standard windscreen
• Scratchproof coating for unimpaired long-term transparency
• Installation only by authorised BMW Motorrad dealers, installation instructions on the RSD (Repair Service Data BMW Motorrad) service data DVD
• General Operating Permit¹

¹ Always comply with the conditions for approval applicable in the country of use.

Windscreen, high, tinted

• Tinted windscreen for visual enhancement and customisation of the motorcycle
• Shape identical to standard windscreen of the R 1200 GS Adventure
• Scratchproof coating for unimpaired long-term transparency
• Installation only by authorised BMW Motorrad dealers, installation instructions on the RSD (Repair Service Data BMW Motorrad) service data DVD
• General Operating Permit¹

¹ Always comply with the conditions for approval applicable in the country of use.

Slipstream deflectors, tinted

• Tinted slipstream deflectors, left and right, for visual enhancement and customisation of the motorcycle
• In shape, identical to the standard slipstream deflectors of the R 1200 GS Adventure
• Workshop installation instructions available for download from ASAP

Front footrests, adjustable

• High-quality CNC-milled footrests, anodised gold finish.
• 3 positions selectable for height of front footrest:
– Top position same as standard footrest, 2 other, lower positions selectable (10 mm difference between settings)
– Easy to adjust by screw
• Spring-mounted footplate:
– Comfortable spring shock absorption for seated riding
– When the rider stands on the footrests the extra weight presses the footplate down flush with the footrest. The serrated outside contour exposed in this way offers a better stance and therefore more control over the motorcycle.
• Replaceable plastic contact guard
• Width of the tread: 4.8 cm (standard R1200 GS: 3.0 cm; standard R1200 GS Adventure: 5.0 cm)
• Length of the tread: 10.5 cm (standard R1200 GS: 9.2 cm; standard R1200 GS Adventure: 10.4 cm)
• Lasered BMW Motorrad logotype
• Installation only by authorised BMW Motorrad dealers, installation instructions on the RSD (Repair Service Data BMW Motorrad) service data DVD

Heated handlebar grips

• Replacements for the existing grips (multifunction switch for right handlebar fitting also has to be replaced).
• Installation and enabling only by authorised BMW Motorrad dealers (installation instructions on the RSD (Repair Service Data BMW Motorrad) service-data DVD).

BMW Motorrad Navigator V

• Bluetooth-compatible GPS satnav device optimised for use on motorcycles
• Large, bright 5″ display
• Available either with map data for Europe or North America¹, or without preinstalled map data
• Free lifelong map updates (only for the options with preinstalled map data)
• 8 GB integrated memory (world unit 4 GB), and with slot for SD card
• Optional Garmin Smartphone Link for congestion information in real time, up-to-the-minute weather forecasts and more
• Specially for R1200 GS and R1200 GS Adventure:
– Extended data interchange via LIN bus (My Motorcycle pages, warnings)
– Optimised and extended HMI control options by means of the Multi-Controller
– Only in combination with optional extra “Preparation for navigation system” (retrofit technically possible)
• See separate product information bulletin for more detailed information on the Navigator V

¹ Available only in USA

Aluminium enduro engine guard

• Robust shield made of aluminium, 2 mm thick, anodised
• Bracket is made of special steel
• Protects the bottom of the engine against flying stones and contact with the ground or obstacles
• Considerably wider and longer than the standard engine guard
• Enhances the machine’s off-road character
• Weight: Approx. 1.5 kg
• Installation only by authorised BMW Motorrad dealers, installation instructions on the RSD (Repair and Service Data BMW Motorrad) service data DVD

Headlight guard

• Protects the headlight against flying stones when the motorcycle is used for off-roading.
• Snap-lock system for straightforward, speedy installation and removal
• For off-roading only
• Initial installation of the brackets only by authorised BMW Motorrad dealers, installation instructions on the current RSD (Repair and Service Data BMW Motorrad) DVD

LED auxiliary headlights

• Powerful LED auxiliary headlight in die-cast aluminium housing
• Vehicle’s visibility profile is better
• More safety on the road
• Modern LED technology:
– LEDs are so long-lasting as to be virtually wear-free, so operation is fault-free and maintenance-free as well
– White LEDs emit light of a colour very close to that of daylight for differentiated illumination of the road ahead
• Diameter approx. 70 mm, length approx. 110 mm
• Worldwide homologation, no technical inspection or approval required (CE/SAE mark of conformity)
• Installation and enabling by authorised BMW Motorrad dealers only; installation instructions on the RSD (Repair and Service Data BMW Motorrad) DVD

Retrofitting optional extras

It is technically possible to retrofit the following optional extras. See the ETK/EPC for details of all the parts needed for retrofits.
• Daytime running light
• LED headlight
• Tyre pressure monitoring (RDC)
• Cruise-control system

Note: Automatic stability control (ASC) and riding modes are standard.

Anti-theft alarm

• Acoustic and visual signals as alarm in the event of change of position or vibration
• Locking the motorcycle activates the anti-theft alarm
– No remote control needed

Safety plug for oil filler neck

• Cap for oil filler neck, lockable with special cranked-tip tool
• Protection against theft of the cap and also to keep foreign substances from entering the oil system
• Aluminium, milled, surface anodised silver
• BMW Boxer logotype
• Supplied complete with special cranked-tip tool and O-ring

On-board toolkit service kit

• On-board toolkit service kit for simple maintenance work and upkeep
• Small, light and multifunctional:
– Quicker and easier to snap together and take apart, with snap adapter and ball lock
– Standard bit adapter and standard tool adapter (9×12 mm and 3/8″) mean that other components can be added to the kit in accordance with individual preference.
• Tool quality and finish (surface, harness, etc.) are of course outstanding
• Including practical tools wallet in black artificial leather
• Scope of supply:
– Spark plug wrench, telescopic, w/f 14
– Allen key, w/f 19 3/8″
– Bit adapter 3/8″ square – 1/4″ hex
– Adapter, adjustable 3/8″ – 9×12 mm
– Open-ended spanner, w/f 10 and 14 – 9×12 mm
– Ring spanner, w/f 17 – 9×12 mm
– Bits, cross-head PH1 and PH2 – 1/4″ hex
– Bit, plain 6 mm – 1/4″ hex
– Bits, Torx 25, 30, 40, 45 and 50 – 1/4″ hex
– Socket wrench insert, w/f 13 – 3/8″ square
– LED flashlight (without battery¹)
– Wallet for on-board toolkit service kit
– Operating instructions
• The adapter for the direct ignition coil must be ordered separately. The tools wallet has an empty slot to accommodate this optional tool.

¹ The device takes 4 button cells, 1.5 V, type LR-41.

Paddock Stand

• Paddock Stand for rear wheel swinging arm, made of strong rectangular-section special-steel tubing, welded
• For lifting the motorcycle quickly and holding it securely in position
• Universal for many BMW Motorrad models
• How it works: The tubular holder of the Paddock Stand is simply pushed through the hollow rear axle and pressure is then applied to the lever to lift the rear wheel. There is an adapter for matching the diameters of tubular holder and hollow rear axle.

Other useful accessories

• Extra socket
• LED light for socket, 410 mm
• Battery charger
• Repair kit for tubeless tyres
• Motorcycle cover
• Motorcycle cleaner
• Engine oil

HÃY KHÁM PHÁ
Facebook
1
Close chat
Hello! Thanks for visiting us. Please press Start button to chat with our support :)

Start

ĐĂNG KÝ LÁI THỬ